YAMAHA 850 TRX 850 1995

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
3 From 8
No results were found for the filter!
K-MaxX Wide 1 Fatty drag bar handlebar, 32mm clamp, 850mm wide
K-MaxX Wide 1 Fatty drag bar handlebar, 32mm...
K-MaxX Wide 1 Fatty drag bar handlebar with a 32mm clamping diameter and 22mm outer ends. Compared with the Superbike handlebar, it has a straight shape and a different width. Check whether the standard hoses and cables are long enough...
179.00€ *
NGK spark plug Yamaha XJR 1200, XJR 1300, FJ 1200, etc.
NGK spark plug Yamaha XJR 1200, XJR 1300, FJ...
NGK DPR8EA-9 spark plug. This spark plug is used in hundreds of different Yamaha motorcycle models, including all Yamaha XJR 1200 and XJR 1300 models, Yamaha V-Max 1200, TDM 900, TRX 850, as well as Honda, Kawasaki, Suzuki, etc. NGK...
5.90€ *
Handlebar risers for 28.5mm handlebars, 20mm rise, machined, black anodised
Handlebar risers for 28.5mm handlebars, 20mm...
SW-Motech 20mm handlebar risers for Ø28.5 mm handlebars These vehicle-specific handlebar risers, made from robust CNC-machined aluminium, raise the handlebar by 20 mm and noticeably improve riding comfort. The sturdy, weather-resistant...
120.00€ *
Windscreen fixing kit, M6 aluminium bolts with nuts and washers, pack of 8
Windscreen fixing kit, M6 aluminium bolts with...
Powerbronze fairing bolt kit, 8 black M6 x 20mm black-anodised aluminium bolts with rubber nuts and black washers for securing motorcycle windscreens on all motorcycles. A sturdy replacement for the plastic screws often used to secure...
18.50€ *
Windscreen fitting kit, M5 aluminium screws with nuts and washers, pack of 8
Windscreen fitting kit, M5 aluminium screws...
Powerbronze black fairing screw kit, 8 pieces. Black anodised M5 x 15mm aluminium screws with rubber nuts and black washers for securing windscreens on all motorcycles. A sturdy replacement for the plastic screws often used to secure...
16.90€ *
K-Maxx StreetFlat Fatty aluminium handlebar, 32mm clamp, 820mm wide
K-Maxx StreetFlat Fatty aluminium handlebar,...
K-MaxX StreetFlat Fatty handlebar with a 32mm clamp section and 22mm outer sections. Its flatter, straighter shape and width distinguish it from the Superbike handlebar. Check whether the standard hoses and cables are long enough or need...
99.00€ *
Steering head bearing set Yamaha, Suzuki, tapered roller bearings with lower dust seal
Steering head bearing set Yamaha, Suzuki,...
Upper and lower steering head bearing set with lower dust seal. These steering head bearing sets use extremely sturdy tapered roller bearings. For a wide range of Yamaha & Suzuki motorcycle models, including XJR 1200, XJR 1300, FZS 600...
34.50€ *
Clutch cable Yamaha TRX 850
Clutch cable Yamaha TRX 850
Clutch cable Yamaha TRX 850. (For comparison, the genuine Yamaha spare part number is 4NX263350000.) Photo shows an example.
16.90€ *
Carburettor repair kit, YAMAHA FZR1000EXUP 89-95, TDM850 91-99, TRX850, XTZ750, FZR750R, CAB-Y17
Carburettor repair kit, YAMAHA FZR1000EXUP...
Tourmax carburettor repair kit for YAMAHA FZR1000EXUP 89-95, TDM850 91-99, TRX850, XTZ750, FZR750R, CAB-Y17 Included: 1 x float needle valve with seat 1 x float bowl gasket 3 x O-ring Photo shows an example.
24.95€ *
RENO type 3 LED headlight, 7 inch, 200mm
RENO type 3 LED headlight, 7 inch, 200mm
HIGHSIDER 7-inch RENO type 3 LED headlight The Reno LED headlight is a high-performance headlight with very good light output. Dipped beam is 18 watts, main beam 30 watts. Housing width is 200mm. Our highlights – give your bike an...
269.95€ *
Fuel tap repair kit Yamaha XJR 1200 / XJR 1300 1995–2006 & TRX 850
Fuel tap repair kit Yamaha XJR 1200 / XJR 1300...
Tourmax repair kit for Yamaha fuel taps (carburettor models) Many Yamaha carburettor models, particularly the XJR range and TRX 850, develop a characteristic leak in the standard vacuum-operated fuel tap as they age. Fuel can then flow...
29.90€ *
Brake hose banjo bolt M10 x 1.25mm, for 1 brake hose
Brake hose banjo bolt M10 x 1.25mm, for 1 brake...
Speed Brakes banjo bolts are the ideal addition to braided stainless steel brake hoses. These bolts are available in the same colours as the brake hose fittings. However, different materials and manufacturing processes mean that an exact...
From 5.95€ *
3 From 8

XJR – Auswahl und Einbau

Eine XJR wird nicht durch möglichst viele Zubehörteile besser, sondern durch Komponenten, die zusammenpassen. Ob Du die Serienmaschine erhalten, das Fahrwerk optimieren oder einen Café Racer aufbauen möchtest: Ausgangsbasis, Modell und Einsatzzweck gehören immer zusammen. Teile für Vergaser- und Einspritzermodelle sind nicht pauschal austauschbar. Nenne mir bei Fragen Modellcode, Modelljahr und bereits vorgenommene Umbauten. Dann können wir gezielt über die passende Lösung sprechen.

Zurück zum Kategorie-Einstieg