Standard silencer modification for Yamaha XJR 1200 & XJR 1300 carburettor models, 28mm bore
- Order number: 38-1045
Our exhaust outlet pipes are designed to give the Yamaha XJR 1200 and XJR 1300 models from 1995-2001, XJR 1300 RP06 2002-2003 and XJR 1300 RP10 2004-2006 a lovely deep, bassy sound. With this conversion kit, your XJR finally sounds like a 1200 or 1300 cm³ machine without becoming loud. The 28mm outlet pipes (internal diameter!) are designed not to become conspicuously loud. They are so neatly and well made that only someone familiar with the XJR, who perhaps knows that the standard outlets are slightly smaller, is likely to notice. Naturally, this silencer modification is not approved for road use, but our many years of experience tell us that it almost never causes problems. A diameter of 28mm may seem small to you, but the diameter is not the main point: the modified outlets bypass the silencer's middle chamber, improving the sound with only a small change in size!
Supplied as a pair, for both silencers. Gas-tight stainless steel blind rivets are included. If you select the option, the specially made drilling tool for professionally drilling out the original outlet pipe is also included as an optional extra. If your silencer is still in its original condition, our drilling tool makes the conversion considerably easier and quicker!
Carburettor setting note: If no other changes have been made to the XJR, the carburettors do not need retuning. This exhaust modification also combines very well with our tuning kits, helping the engine to "breathe out" more freely when the tuning kit allows it to "breathe in" more. It therefore benefits overall power output, and no separate tuning setting is required for this combination either.
This exhaust modification can also be used on the 2002-2003 XJR 1300 RP06, but a different drilling tool is required. Please therefore check your model year carefully when ordering!
Note for the XJR 1300 RP10 2004-2006 conversion (model with catalytic converter): The drilling tool is essential for installation. The outlet pipe must be drilled out in both the rear and middle silencer chambers to remove it.
The restoration kit is intended for refitting the drilled-out original outlet pipes. It consists of stainless steel washers to hold the standard pipe in place again. No outlet pipes are included! Stainless steel rivets are also included in the restoration kit.
Included: 2 x exhaust inserts with 28mm outlet pipes (internal diameter), 6 x gas-tight stainless steel blind rivets
Optional accessories: Drilling tool (highly recommended for installation!) for XJR 1200 & XJR 1300 4PU & RP02, or alternatively for XJR 1300 RP06. XJR 1300 RP10 with its own special drilling tool.
Important note!!!
NEVER use aluminium blind rivets to fit the outlet pipes. Over time the rivets work loose, and you will lose the end caps and exhaust inserts. The inserts can be bought separately, but the end caps are only available with new silencers, which Yamaha no longer supplies either!!!
Klaus Goerz
Kaulerweg 1
57632 Kescheid
info@klaus-goerz.de
Sehr angenehmer Sound
Das Einbauwerkzeug ist absolut empfehlenswert - alles andere ist auch bei bester Werkstatt-Ausstattung ein großer Krampf!
Zum Vernieten am Besten keine Billig-Zange verwenden da Edelstahl. Der Klang ist jetzt schön dumpf und präsent ohne übermäßig aufdringlich zu sein. Das steht einem Big Bike alter Schule und einem Fahrer im gesetzten Alter am Besten ;-)
Hallo Jürgen, vielen Dank für die sehr detaillierte Rückmeldung! Ja, mit dem Ausbohrwerkzeug kann man recht schnell und sauber arbeiten, alles Andere wird sehr ungenau und zeitaufwändig. Den Klang empfinde ich auch damit als "für einen Big Four angemessen!", und dennoch nicht laut. Das macht die Änderung noch recht unauffällig. Liebe Grüße und viel Freude mit der XJR! Klaus
Schöner bassiger Sound
Das Auspuffkit ist montiert, schöner bassiger Sound.
Hi Ralf, vielen herzlichen Dank für die zufriedene Rückmeldung! Viel Freude mit der XJR und dem neuen Sound!
Liebe Grüße, Klaus